Comealong2.jpg
  • Comealongs and HiTemp® Comealongs for ACSR, AAC, AAAC, ACAR, ACSS, and ACSS/TW Conductors

    Features:

    • Rugged design
    • Fully assembled
    • Angled bailed
    • Tested and rated

    Applications:

    • Stringing tools designed for pulling conductors up to initial sag tensions

PRODUCT DESCRIPTION

Comealongs and HiTemp® Comealongs are stringing tools designed for pulling conductors up to initial sag tensions. If the required tension is greater than the rated tension of a single comealong, two or more comealongs should be used. When desired sag tension is reached, the conductor should be dead ended promptly and the comealong removed.

Comealongs and HiTemp Comealongs must receive periodic maintenance. This practice should consist of a thorough cleaning with close inspection for nicked or rough conductor grooves, cracked body, bent eye bolts or damaged bail. The eyebolts should be kept clean and oiled.

The conductor groove should be kept clean and dry. After each six-month-use and at the beginning of each job, all comealongs should be subjected to a pull test equal to its rated strength. If any damage is found, the comealong should be disposed of properly.

WARNING: Comealongs are not intended for use as dead ends
and are not recommended to hold conductors at
sag tension limits for longer than 6 hours.

Resources

Instruction_Icon.png

Installation Instructions

Comealongs Installation Instructions

VIEW
Instruction_Icon.png

Installation Instructions

Comealongs Self-Damping Conductors Instructions

VIEW
Get in touch and request a quote.

Contact Us